volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Procedures|Page 8211 > < Procedures|Page 8209
Page 3
background image

-

Front bumper, vehicles through 10.2006, removing, refer to --> [ Bumper Cover ] 

-

Front bumper, vehicles from 11.2006, removing, refer to --> [ Bumper Cover Assembly Overview ] See: Bumper/Front Bumper/Service and
Repair/Front Bumper Overview, from 11.2006

-

Remove the wheel housing liner. Refer to --> [ Front Wheel Housing Liner Assembly Overview ] See: Fender/Front Fender/Front Fender
Liner/Service and Repair

-

Disengage release in coupling. Refer to --> [ Release, Disconnecting ] See: Doors, Hood and Trunk/Hood/Service and Repair/Hood Overview

-

In vehicles with charge air cooler, disconnect pressure hoses.

-

Disconnect the electrical harness connectors present.

-

Loosen seal on lock carrier.

-

Drain the coolant and disconnect coolant line.

-

Disconnect the transmission fluid cooler lines.

-

Disconnect condenser lines

-

Remove the bolts - 6 - and - 7 - on  left and right and remove side guide trims - 5 - from fenders. 

-

Remove bolts - 8 - and - 9 -.

-

Remove the bolts - 2 - and - 3 - and  lift out lock carrier - 1 - together with bumper carrier -  4 - with a second mechanic.

CAUTION!
Do not start the engine when the A/C system or coolant lines are disconnected. 

Procedures|Page 8211 > < Procedures|Page 8209