Touareg 2 V6-3.6L (BHK) (2008)
The right side is a mirror image, that means the brake cable nipple must be pushed upward.
-
Unclip brake cable from retainer on tank.
-
Remove brake cable from retainer on subframe and pull out.
Installing
-
Installation is performed in the reverse sequence.
Brake cable nipple must noticeably engage in spreader.
-
Engage brake cables in compensator bracket.
-
Install nut - 1 - onto pull rod - 2 - until dimension - a - (measured before) removal is reached.
-
Check free play at park brake pedal. Refer to --> [ Park Brake Pedal, Checking Play ] See: Service and Repair/Procedures.