Touareg 2 V6-3.6L (BHK) (2008)
Radiator: Service and Repair
Radiator
Radiator
Special tools, testers and auxiliary items required
‹› Refractometer (T10007)
‹› Adapter (VAG 1274/8)
‹› Drip tray (VAG 1306) or drip tray for VAS 6100 (VAS 6208)
‹› Torque wrench (VAG 1331)
‹› Spring-type clip pliers (VAS 5024A)
‹› Cooling system charge unit (VAS 6096)
Removing
-
Remove insulation panel..
-
Drain cooling system. Refer to --> [ Draining and Filling ] See: Service and Repair/Procedures.
-
Disconnect all coolant hoses from radiator.
-
Remove front bumper.
-
Bring lock carrier into service position. See: Body and Frame/Lock Carrier
-
Remove radiator fan support with fans. Refer to --> [ Fan Support and Fans ] See: Radiator Cooling Fan/Service and Repair/Fan Support and Fans.
-
Loosen securing clips for condenser and transmission oil cooler.
-
Remove upper radiator bolts and remove radiator upward.
Installing
Installation is performed in the reverse order of removal, noting the following:
‹› When installing a new radiator, old coolant must not be reused.
-
Fill cooling system. Refer to --> [ Draining and Filling ] See: Service and Repair/Procedures.
-
Electrical connections and routing.