Touareg 2 V6-3.6L (BHK) (2008)
-
Remove the bolts - 1 - for the left and right engine mounts.
-
Be aware of the available clearance between the cylinder head and the bulkhead.
-
Now carefully lift the engine with the adapter (10 - 222 A /16).
-
To remove the engine mount bracket, bracket must be removed from cylinder block at left or right so that engine can be raised up enough.
Installing
Installation is performed in reverse order of removal.
-
When installing, make sure the alignment pin of the engine mount is correctly positioned in the engine mount bracket.
-
First install all bolts by hand, and then tighten them all to specifications.
Tightening specification for bolt - 1 -: 60 Nm.
Tightening specification for nut - 2 -: 75 Nm.