Touareg 2 V6-3.6L (BHK) (2008)
/Page-477001.png)
Intake Manifold: Service and Repair
Upper Intake Manifold
Upper Intake Manifold
Special tools, testers and auxiliary items required
‹› Torque wrench (VAG 1331)
‹› Assembly tool (T10118)
Removing
‹› Read safety precautions before beginning work. Refer to --> [ Safety Precautions ] See: Powertrain Management/Fuel Delivery and Air
Induction/Service Precautions/Vehicle Damage Warnings/Safety Precautions.
‹› Observe the rules for cleanliness. Refer to --> [ Clean Working Conditions ] See: Powertrain Management/Fuel Delivery and Air
Induction/Service Precautions/Vehicle Damage Warnings/Clean Working Conditions.
‹› Intake manifold assembly overview. Refer to --> [ Intake Manifold Assembly Overview ] See: Intake Manifold Assembly Overview.
-
Remove the ignition coil wiring harness cover strip - in direction of arrows -.
-
Place the assembly tool (T10118) against the release button - arrow -, and carefully remove all the connectors from the ignition coils with power
output stages.
-
Press the cable duct upward using a screwdriver and move the connectors to the side.
