volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

A/C Display Control Head with A/C Control Module|Page 6059 > < A/C Display Control Head with A/C Control Module|Page 6057
Page 2
background image

7

Button - upper air distribution

8

Button - center air distribution

9

Button - lower air distribution

10

Defrost button

11

Push button for rear window defroster

‹› Rear window defroster remains on for 4 to 20 minutes, depending on  exterior temperature.

12

Button for air recirculation

‹› Press button for recirculating air function to prevent polluted air  from entering interior.

‹› Heated front windshield function can be controlled by this button,  depending on vehicle equipment.

13

Button - upper air distribution

14

Button - center air distribution

15

Button - lower air distribution

16

Button for setting blower speed, right

17

Display for blower speed, right

‹› In automatic operation the actual blower speed is displayed.

18

Display for selected interior temperature, right

‹› Can be changed from degrees Celsius to degrees Fahrenheit and vice  versa --> [ Convert degrees Celsius to Fahrenheit in vehicles

with menu control elements in windshield washer lever. ] 

19

 AUTO button, right

‹› In automatic mode the Climatronic maintains the selected front right  interior temperature automatically. With this setting the vent air

temperature,  the blower speed and the air distribution are controlled automatically.

20

Temperature regulator, right

‹› Change front right temperature setting by turning.

21

 REST button

‹› When residual heat function is switched on the residual heat of engine  is pumped by a coolant pump to the heat exchanger.

22

Air conditioning synchronization button

‹› This button transfers all driver's air conditioning settings to the  other seats.

23

Button for automatic recirculating air

‹› Press button for automatic recirculating air function to prevent  polluted air from entering interior.

‹› Recirculating air is switched on automatically under the following  conditions:

‹› When the windshield washer system is operated.

‹› When Sensor For Air Quality (G238) is activated. 

‹› When engaging the reverse gear this function is only active for 2 minutes  after starting the engine

‹› Blower speeds on A/C Control Head (E87). 

A/C Display Control Head with A/C Control Module|Page 6059 > < A/C Display Control Head with A/C Control Module|Page 6057