Touareg 2 V6-3.6L (BHK) (2008)
Headlamp Control Module: Service and Repair
Headlamp Range/Cornering Lamp Control Module
HID Headlamps with Cornering Lamp, through 11.06
Headlamp Range/Cornering Lamp Control Module
Special tools, testers and auxiliary items required
‹› Release lever (T10039)
‹› Wedge (T10039/1)
‹› Removal of the steering wheel is not necessary. To improve clarity, the steering wheel is not shown in the following illustrations.
Removing
-
Switch off ignition, switch off all electrical consumers and remove ignition key.
-
In vehicles without radio/navigation system or without radio, pry cover - 1 - out of mounts using trim removal wedge (T10039/1).
-
If necessary, remove radio - 2 -.
-
If necessary, remove radio/navigation system - 3.
-
Remove all switches in instrument panel center --> [ Center Instrument Panel Switch ] See: Instrument Panel, Gauges and Warning
Indicators/Service and Repair.
-
Remove A/C control head - 4 -
-
Remove side instrument cluster cover on front passenger side
-
Remove cover in footwell on driver side.
‹› Two versions of panel - 2 - are installed in the Touareg, a panel with threaded pin - 3 - and clamping washer - 4 - or a panel without threaded pin
and clamping washer.