Touareg 2 V6-3.6L (BHK) (2008)
/Page-1272005.png)
eyelet between steps is necessary.
-
Insert the adapter in the wiring eyelet and sand off the corrosion and contamination with circular motions.
-
Check the wiring eyelet and resand it if necessary.
-
If necessary, remove the burr on the wiring eyelet with the deburrer.
-
Reinstall the wiring eyelet with the specified torque, refer to Wiring diagrams, Troubleshooting & Component locations.
‹› Optimal contact is ensured if the bolted components are tightened to the specified torque after cleaning.
-
Protect the connection with the corresponding protection material.
-
Reconnect the battery.
CAUTION!
Risk of injury. Observe warning notes and safety precautions. Refer to --> [ Battery Safety Precautions ] See: Starting and
Charging/Battery/Description and Operation/Battery Safety Precautions!
-
Reprogram the window regulators, enter the radio code, set the clock and, if necessary, recode control modules that have error messages.
Using Contact Surface Cleaning Set VAS 6410
The Repair Set (VAS 6410) enables optimal repair quality in the electrical system area. Using the tools, service work can be performed in the area of
the contact sensor on the threaded connection wiring harnesses in the high current circuit (starter and charging current). The Repair Set (VAS 6410)
is adapted to the vehicle's structural measurements and ensures correct servicing and a comfortable procedure.
‹› The illustrations of the service work only serve as examples.
