volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

PCV Heater|Testing and Inspection|Page 3042 > < PCV Heater|Testing and Inspection|Page 3040
Page 3
background image

Specified value: battery voltage.

Switch the ignition off.

If the specified value was not obtained:

-

Check the wiring from the Positive Crankcase Ventilation  (PCV) Heating Element (N79) electrical connector terminal  1 to the Power Supply
Relay (terminal 50) (J682) socket  1/30 for a short circuit to Ground (GND), or an open circuit.

-

Check the electrical harness connector for damage, corrosion, loose  or broken terminals.

-

If necessary, repair the wiring connection.

If no malfunctions are found in the wiring:

Checking Ground (GND)

-

Using a multimeter, check the Positive  Crankcase Ventilation (PCV) Heating Element (N79) electrical  connector terminal 2 to Ground (GND)
for resistance.

Specified value: 1.5 ohms Max.

If the specification was not obtained:

-

Check the wiring for a short circuit to each other, Battery (+),  and Ground (GND).

-

Check the electrical harness connector for damage, corrosion, loose  or broken terminals.

-

If necessary, repair the faulty wiring connection.

PCV Heater|Testing and Inspection|Page 3042 > < PCV Heater|Testing and Inspection|Page 3040