Touareg 2 V6-3.6L (BHK) (2008)
Observe Safety Precautions: --> [ Safety Precautions ] See: Description and Operation/Fuel System
Observe Clean Working Conditions: --> [ Clean Working Conditions ] See: Description and Operation/Fuel System
-
Switch ignition on. Fuel pump must run audibly for approx. 2 seconds.
-
Switch off ignition.
If Fuel Pump (FP) does not start up:
-
Remove nuts - 1 - on right side of fuel delivery unit cover. If necessary, remove backrest support - 2 - or mounting bracket: --> Body Interior 72
Removal and Installation
-
Disconnect connector from Fuel Pump (FP) Control Module (J538) - 5 -.
-
Switch ignition on.
-
Check voltage supply between connector terminals - 3 - and - 4 - using low voltage tester. LED must light up.