Touareg 2 V6-3.6L (BHK) (2008)
Remote Control Module: Service and Repair
Control Module in Steering Wheel
Before starting repair work, perform the following:
-
Switch off ignition, switch off all electrical consumers and remove ignition key.
Removing
-
Remove driver's side airbag unit.
‹› Position the uninstalled airbag unit so that it is not directly in your field of view.
‹› Before starting repair work on removed airbag unit, electrostatically discharge yourself. This is accomplished by, for example, touching grounded
metal like water pipes, heating pipes or metal carriers.
-
Remove driver's airbag attachment panel.
-
Lay aside removed airbag unit on soft surface with top side facing down (this applies only to following repair work).
-
Disengage harness connectors - arrows - and disconnect them.
-
Remove 4 mounting bolts from signal horn operation - arrows -.
-
Before removing bracket for signal horn operation, disengage harness connector of airbag unit and disconnect - arrow -.