Touareg 2 V6-3.6L (BHK) (2008)
Seat Belt Height Adjuster: Service and Repair
C-Pillar Seat Belt Height Adjuster
C-Pillar Seat Belt Height Adjuster
‹› Removal and installation is described for the right-hand side of the vehicle. Removal and installation for the left-hand side is performed in the
same manner.
Removing
-
Remove roof end strip --> [ Roof End Strip ] See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Roof End Strip
-
Remove D-pillar trim --> [ D-Pillar Trim ] See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/D-Pillar Trim.
-
Remove bolt - 1 - (50 Nm) and remove belt relay - 2 - from belt height adjuster.
-
Remove bolt - 3 - (4.5 Nm) and separate belt height adjuster - 4 - from mounting in carrier plate.
Installing
-
Perform the steps used for removal in reverse order.