Touareg 2 V6-3.6L (BHK) (2008)
-
Remove external starting point housing upward from bracket while being careful of connected lines.
-
Release both retaining tabs - arrows - and remove B+ wire connecting piece - 1 - downward from external starting point housing.
-
Remove mounting bolt - 1 - for hydraulic oil reservoir - 2 -, remove reservoir - 2 - from reservoir and external starting point bracket and lay it
aside with hoses connected.
-
Remove mounting bolt - 1 - and mounting nut - 3 - and remove hydraulic oil reservoir and external starting point bracket - 2 - from vehicle.
Installing