Touareg 2 V6-3.6L (BHK) (2008)
-
Hook the lifting tackle (2024 A) into the shop crane (VAS 6100).
-
Lift the engine with the shop crane (VAS 6100).
-
Remove engine mount.
-
Remove three bolts for engine mount bracket at engine block.
-
Move engine bracket slightly to side.
‹› Engine bracket must not be removed completely. Ground lines remain connected.
-
Remove upper starter bolt - arrow - on transmission side.
-
Remove heat shield - 2 - from wiring retainer.
-
Remove the lower bolt for the starter - arrow - on the engine side.