Touareg 2 V6-3.6L (BHK) (2008)
8. Press piece (T10205/3)
-
Pull out wheel hub, hold tool securely.
Wheel Bearing, Removing
-
Remove securing ring.
-
Mount tools as depicted in illustration.
Please note:
Offset of thrust piece (T10205/6) must point toward rear final drive.
1. Threaded rod M20 (T10205/8-1)
2. Threaded nut M20 (T10205/8-2)
3. Hydraulic press (VAS 6178) with pressure head (T10205/13)
4. Mount (T10205/4)
5. Mounting tube (T10205/5)
6. Threaded rod M20 (T10205/8-1)
7. Threaded nut M20 (T10205/8-2)
8. Thrust pad (T10205/6)
-
Pull out wheel bearing while holding device securely.
Pulling Bearing Inner Race off Wheel Hub
-
Install separating tool behind bearing inner ring.