Touareg 2 V6-3.6L (BHK) (2008)
Shift Interlock Switch: Service and Repair
Selector Lever Park Position Solenoid
Selector Lever Park Position Solenoid
Removing
-
Remove the shift mechanism. Refer to --> [ Selector Mechanism ] See: Shifter A/T/Service and Repair/Removal and Replacement/Selector
Mechanism.
-
Release connector and disconnect.
-
Release the solenoid from its mounting and pull it upward and out from the locking lever - 1 - and shift mechanism.
Installing
-
Set the solenoid lever - 2 - upward vertically.
-
Set the solenoid into the mount of the shift mechanism at a slight angle.
-
Attach the lever - 2 - to the locking lever - 1 -.
-
Push the solenoid into the shift mechanism until the limit stop, and it is locked into its mounting - arrow -.