Touareg 2 V6-3.6L (BHK) (2008)
Transmission Mount: Service and Repair
Transmission Carrier and Bracket
Transmission Carrier and Bracket
Special tools, testers and auxiliary items required
‹› Torque wrench (VAG 1331)
‹› Torque wrench (VAG 1332)
‹› Engine and transmission jack (VAG 1383 A) with universal transmission adapter (VAG 1359/2)
Removing
-
Raise vehicle.
-
Remove noise insulation on bottom of transmission. Refer to --> Body Exterior. See: Body and Frame
-
If an underbody impact guard is located beneath transmission carrier and bracket, remove it.
-
Place the engine and transmission jack (VAG 1383 A) with universal adapter (VAG 1359/2) and a block of wood - A - under transfer case.
Do not loosen bolts - arrows - yet.
-
Remove transmission carrier bolts - A - from structure - arrows -.
-
Lower transfer case slightly, until transmission carrier hangs freely.