Touareg 2 V6-3.6L (BHK) (2008)
Transfer Case Mount: Service and Repair
Transmission Carrier Bonded Rubber Bushings
Transmission Carrier Bonded Rubber Bushings
Special tools, testers and auxiliary items required
‹› Pressure plate (VW 402)
‹› Punch (VW 412)
‹› Thrust piece (VW 432)
‹› Base block (VW 441)
‹› Tube (3296)
‹› Alignment fixture (T10214)
Removing
-
Remove transmission carrier. Refer to --> [ Transmission Carrier and Bracket ] See: Transmission Carrier and Bracket.
-
Press out the bonded rubber bushing.
Installing
-
Connect the new bonded rubber bushing with the pressure piece (T10214/3).