Touareg 2 V6-3.6L (BHK) (2008)
Ridged Hoses, Repairing
Special tools, testers and auxiliary items required
‹› Hot Air Blower (Vas 5179) Or
‹› Hot Air Blower (V.A.G 1416/) Or
‹› Heat Gun (Vas 1978/14)
‹› Area to be repaired must but be under stress of stretching or bending.
‹› If damaged area is longer than 20 mm, a new section of corrugated hose must be obtained, and two sets of adapters inserted using following the
following procedure.
-
Trim and remove damaged sections of hose.
-
Select corresponding connection pieces - 2 - and - 3 - as well as corresponding heat-shrink sleeves.
-
Carefully warm end of hose - 1 -.
-
Insert repair adapter - 2 - into hose - 2 - - arrow A -.
-
Carefully warm end of hose - 4 -.
-
Insert repair adapter - 3 - into hose - 4 - - arrow B -.
-
Trim shrink tubing sections so that corrugated hose is covered a minimum of 20 mm - dimension x - of heat-shrink sleeve.