Up!
Assembly overview - rear bumper cover |
Note
Depending on the vehicle model, minor differences may be encountered in the rear bumper cover. |
1 - | Rear bumper cover |
q | Material PP/EPDM. |
q | Removing and installing → Chapter |
2 - | Side guide |
q | Left and right. |
3 - | Locking lug |
q | Left and right. |
4 - | Bolt |
q | Qty. 1 on each side. |
q | Tilted upwards and bolted to side panel. |
q | Specified torque: 2 Nm |
5 - | Bolt |
q | Qty. 4. |
q | Specified torque: 2 Nm |
6 - | PDC sensor |
q | Qty. 3. |
7 - | Spreader rivet |
q | Qty. 3. |
8 - | Electrical connections |