Up!
|
Note
|
|
| Carry out following work: |
| – | Remove mirror glass → Chapter. |
| – | Unscrew bolts -3- (qty. 3) and remove adjustment unit -1- from mirror mounting. |
| – | Swivel adjustment unit together with motor -1- to the side and pull off connector -2-. |
|
| Carry out following work: |
| – | Connect connector -2- to adjustment unit -1-. |
| – | Place adjustment unit -1- on mirror mounting and fix in place by tightening bolts -3- (qty. 3). |
| Specified torque for bolts -2-: 2 Nm. |
| – | Install mirror glass → Chapter. |
| l | Perform functional check. |
