Up!
Assembly overview - door handle and door lock |
Note
Only the left side is shown. The right side is similar. |
1 - | Door lock |
q | Removing and installing → Chapter |
2 - | Bolt |
q | Specified torque: 3 Nm |
q | For lock cylinder. |
3 - | Door handle bracket |
q | Removing and installing → Chapter |
4 - | Lock cylinder |
q | Removing and installing → Chapter |
q | Not always installed in front passenger door, depending on the extras in vehicle |
5 - | Base |
6 - | Cover |
q | Removing and installing with lock cylinder → Chapter. |
q | Removing and installing without lock cylinder → Chapter. |
7 - | Door handle |
q | Removing and installing → Chapter |
8 - | Bolt |
q | Specified torque: 1.5 Nm |
q | Door handle bracket is loosened from door when this bolt is loosened. |
9 - | Cable |
q | From door lock -1- to door handle bracket -3-. |
10 - | Cable |
q | From inner door handle to door lock -1- |
q | With grommet to passage on cover. |
11 - | Bolt |
q | Qty. 2. |
q | Specified torque: 18 Nm |
12 - | Cover |