| –
| Apply adhesive sealing material in continuous bead, holding applicator at right angle to window. |
WARNING | Window must be installed within 10 minutes, or adhesive properties of glass adhesive will be impaired. |
| Adhesive bead should not be applied too thick and windows should not be pressed too forcibly on body flange. Windows no longer have sealing lips and therefore excessive adhesive will be visible in the joint area. |
|
| t
| Using 2 suction lifters -V.A.G 1344-, install glass pane in window aperture, align to centre and press in onto spacing lip. |
| t
| Replace stickers (e.g. for airbag) if there were any. |
|
|
|
