Up!
|
Note
|
– | If fitted, remove window crank → Chapter. |
Carry out following work: |
– | Remove front door trim → General body repairs, interior; Rep. gr.70. |
– | Removing cover |
– | Undo and remove hexagon nut -2-. |
– | Push guide rail -1- inwards -arrow a-. And pull guide rail downwards out of window channel -arrow b-. |
|
Carry out following work: |
– | Insert guide rail -1- into window channel -3--arrow a-. |
– | The guide rail clip must be exactly fitted onto the window channel -arrow c-. |
– | Insert guide rail threaded stud into door -arrow b-. |
– | Tighten hexagon nut -2- to specified torque of 8 Nm. |