Up!
| Assembly overview - thermostat |
| 1 - | Bolt |
| q | 7 Nm |
| q | Observe tightening sequence → Fig.. |
| 2 - | Thermostat cover |
| 3 - | Gasket |
| q | Ensure proper seating |
| 4 - | Thermostat |
| q | Opening begins at approx. 105 °C. |
| q | Removing and installing → Chapter |
| q | Note installation position → Fig.. |
| 5 - | Bolt |
| q | Observe tightening sequence → Fig.. |
| q | 7 Nm |
| q | For installing thermostat housing to coolant pump |
| 6 - | Thermostat |
| q | Opening begins at approx. 80 °C. |
| q | Removing and installing → Chapter |
| q | Note installation position → Fig.. |
| 7 - | Gasket |
| q | Check for proper seating → Fig. |
| 8 - | Thermostat housing |
| q | Removing and installing → Chapter |
|
|
|
|
|
|
|
|
