Up!
Assembly overview - ignition system |
1 - | Cylinder head cover |
2 - | Spark plug |
q | 25 Nm |
q | Remove and install with spark plug socket and extension -3122 B-. |
q | Type and electrode gap → Chapter. |
3 - | Ignition coil 1 with output stage -N70- |
q | Ignition coil 2 with output stage -N127- |
q | Ignition coil 3 with output stage -N291- |
q | Removing and installing → Chapter |
4 - | Bolt |
q | 8 Nm |
5 - | Connector |
q | Black, 4-pin. |
6 - | Bolt |
q | 10 Nm |
q | For Hall sender -G40-. |
7 - | Hall sender -G40- |
q | Removing and installing → Chapter |
8 - | Connector |
q | Black, 3-pin. |
q | For Hall sender -G40-. |
9 - | Seal |
q | Renew if damaged. |
10 - | Bolt |
q | 20 Nm |
q | The specified torque influences the function of the knock sensor. |
11 - | Connector |
q | Black, 2-pin. |
q | For knock sensor 1 -G61-. |
q | Connector contacts are gold-plated. |
12 - | Knock sensor 1 -G61- |
q | Removing and installing → Chapter |
q | Connector contacts are gold-plated. |
13 - | Engine speed sender -G28- |
q | Removing and installing → Chapter |
14 - | Connector |
q | Black, 3-pin. |
q | For engine speed sender -G28-. |
15 - | Bolt |
q | 8 Nm |
q | For engine speed sender -G28-. |