volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Fuel pump > < Assembly overview - accelerator module

Up!

Removing and installing accelerator module
Removing and installing accelerator module
Carry out the following work:
Removing
   
–  Unscrew bolts -2- to remove steering column trim -1-.
–  Release connector → Item and pull it off accelerator module.
  N48-10670
–  Unscrew securing bolt -arrow- from brake pedal support.
  N20-10940
–  Pull accelerator module -4- downwards out of guides -2-.
–  Remove accelerator module.
Installing
Install in reverse order. In the process, note the following:
  N20-10932
–  Insert retaining lugs -3- of accelerator module -4- into guide -2- on brake pedal support -1-.
–  Ensure that guide -5- of accelerator module -4- is properly seated in hole -6- on brake pedal support -1-.
  N20-10932
Specified torque
ComponentSpecified torque
Accelerator6 Nm

   

Fuel pump > < Assembly overview - accelerator module