Assembly overview - steering box
- Make
- Volkswagen
- Model
- Up!
- Section
- Steering › Steering box › Assembly overview - steering box
Running gearAssembly overview - steering box
| Assembly overview - steering box |
| t | The steering box is not intended to be repaired. In the event of concerns the steering box must be renewed. |
| t | To lubricate steering box, only use steering box grease -AOF 063 000 04-. However, do not over-apply grease to steering box. Air equalisation bores must remain free. Otherwise the bellows will be damaged. |

| 1 - | Steering box |
| q | Removing and installing → Chapter. |
| 2 - | Wheel bearing housing |
| 3 - | Nut |
| q | 20 Nm + 90° further |
| q | Always renew after removing. |
| 4 - | Subframe |
| q | Observe repair information → Chapter. |
| 5 - | Bolt |
| q | 50 Nm + 180° further |
| q | Always renew after removing. |
Parts & tools for this job For Volkswagen Up!
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Volkswagen power steering fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.