Removing and installing roof aerial

Make

Volkswagen

Model

Up!

Section

Infotainment › Aerial systems › Removing and installing roof aerial

Vehicle electricsRemoving and installing roof aerial

Removing and installing roof aerial Removing:

–  Unclip cover strip -arrows-. –  Remove C-pillar trims on left and right. –  Carefully lower moulded headliner a little. –  Unplug aerial cable connector.

–  Unscrew nut -1- securing roof aerial. –  Take roof aerial out upwards. Installing: Installation is carried out in reverse order of removal.   Note t  When positioning the aerial for installation, ensure that the seal is seated correctly. The two guide lugs of the seal must be located in the relevant holes -arrows- of the aerial base.

t  After installing the aerial, ensure that the aerial wiring -2- is routed correctly through the hole -arrow- in the securing nut -1-.

03 General