volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing windscreen wiper arms > < Assembly overview - windscreen wiper system

Up!

Removing and installing wiper blade
Removing and installing wiper blade
Removing:
  Note
t  Driver and front passenger wiper blades must not be interchanged when installing.
t  Joint-free wiper blades are very flexible. Only grip wiper blades in area of wiper blade attachment to lift off windscreen.
t  To remove the wiper blades, the wiper arms should be placed in the „service/winter position“. The „service/winter position“ is activated within 10 seconds after ignition is switched off by pressing the windscreen wiper lever in position „tip wipe“.
–  Move wiper arms to „service/winter position“.
–  Lift up wiper arm.
   
–  Press button -1- and pull wiper blade mounting -3- out of wiper arm -2- in -direction of arrow-.
Installing:
Install in the reverse order of removal. When doing this, note the following:
  N92-10269
–  Push wiper blade mounting -3- onto wiper arm -2- as far as it will go.
–  Ensure button -1- has locked correctly into wiper arm -2-.
–  Carefully fold wiper arm back onto front windscreen.
  N92-10269

Removing and installing windscreen wiper arms > < Assembly overview - windscreen wiper system