Up!
Installing trim element |
These alloy wheels are fitted with exchangeable trim elements. Follow these instructions during installation. |
t | Ensure bonding surfaces in alloy wheel and trim element are free of dust and grease. |
t | Clean bonding surfaces with silicone remover -LSE 020 100 A3-. |
– | Apply 1K window adhesive -DH 009 100 A2- to bonding surfaces -arrows- using cartridge gun -V.A.G 1628-. |
l | Adhesive bead: length = approx. 25 mm and diameter = approx. 10 mm. |
– | Push trim element -2- forcefully into alloy wheel -1-. |
– | Secure trim element -2- on inner side of alloy wheel -3- with clamping washers. |
Minimum curing period: 3 hours at a minimum room temperature of 15°C. |
WARNING
|