WARNING t
| Repairing a damaged wheel using heat treatment such as welding or the addition or removal of material is absolutely forbidden. |
t
| Damaged or deformed wheel rims or wheel rims with cracked or deformed wheel bolt holes may not be repaired. |
t
| Restoration may only be undertaken using approved and genuine paint materials. |
t
| The manufactures guarantee no longer applies once a wheel rim has been restored. |
|
Wheel rims with cracks along the edges may not be repaired and must be replaced immediately. |
Remachining, heat treatment and welding of all types is not permitted. |
Material reforming is not permissible. |
Before restoring, the radial runout and lateral runout must not exceed the manufactures tolerance of 0.8 mm. |
Only cast alloy wheel rims may be filled using a filler putty. These wheels have the material identification AlSi xx stamped in the inner side. |
Forged wheels may not be painted. |
The restoration is limited to the painted surfaces. |
Bright machined wheels, which only have a clear coating, may not be repaired. |
Only surface damage on the viewed side (design surface) of the wheel may be restored. |
Restoring a damaged surface depth of 1 mm must not be exceeded. |
Only up to 50 mm may be removed/ filler filled on the outer boss. |
|
|
|