Vanagon F4-1915cc 1.9L (Water Cooled) (1983)
/Page-246002.png)
After loosening the securing bolts, the alternator must move freely (alternator must drop to the side under its own load)
^
Tension V-belt by rotating the tensioning nut (B) with a torque wrench
^
Torque 8 Nm (6 ft lb)
^
tighten bolt securing tensioning nut
^
Torque 35 Nm (26 ft lb)
^
tighten adjustment bracket support 0P engine block
^
Torque 20 Nm (15 ft lb)
^
start engine
^
run engine for approx 5 min at idle
^
switch off engine
^
retighten V-belt with torque wrench
^
Torque 8 Nm (6 ft lbs.).
