Vanagon F4-1970cc 2.0L (1982)
-
Depress spacer spring by pushing down on 4th gear in a press using VW 460/3
-
Fit 4th gear circlip securely in groove
-
Heat inner races of tapered roller bearing to about 100°C (212°F) and press on
-
efore tightening needle bearing inner race, let tapered roller bearing cool to room temperature
-
Heat 1st gear needle bearing's inner race to about 60°C (140°F) and screw on as far as possible by hand
-
Place pinion shaft in tool 2052 and tighten wing nut lightly
-
Tighten inner race to 210 Nm (152 ft lb)