Vanagon Syncro AWD F4-2109cc 2.1L (MV) (1989)
- remove circlip from speedometer cable (arrow)
- remove speedometer cable from rubber sleeve in steering knuckle (arrow)
- when installing cable, align marks (arrows) on cable
- after installing circlip on speedometer cable end, seal with silicone seal
CAUTION: To avoid premature cable failure, position cable so it is free of strain or sharp bends. Do not grease connection to speedometer; this could
cause needle to stick.
CAUTION: When replacing the drive cable, the rubber sleeve in the steering knuckle must be replaced.