Vanagon Syncro AWD F4-2109cc 2.1L (MV) (1989)
Fuel Pressure: Testing and Inspection
Checking Residual Pressure
Residual pressure, checking
-
Shut off engine and wait ten minutes
2.0 to 2.5 bar (29 to 36 psi)
If pressure value NOT obtained there are three possible causes
Caution:
Use extreme care not to damage fuel lines when clamping
-
Check fuel pump check valve by clamping off line from fuel pump
-
Check fuel pressure regulator by clamping oft return line to tank
-
Check fuel injectors by clamping off lines from injectors to pressure regulator, if necessary check injectors
In each of these cases, observe gauge pressure while clamping off the individual lines.
If the pressure drop ceases or slows dramatically, the problem is in the indicated component.