240 L4-2127cc 2.1L SOHC B21A (Can) (1984)
Install:
-
control wire and sheath for air-mix (1). Adjust control.
-
both upper mounting screws in heater housing (2) together with fan motor ground lead.
Note: Illustration shows versions B/C where the control valve remains in its bracket throughout.
Note: New heat control valve version and 1992 models onwards: Connect hoses to heater matrix. Tighten hose clips. Now remove hose pliers. Attach
control wire to heat control valve.
Now go to C35.
VERSION A
C31
Connect control wire and sheath to control valve. Adjust control. Install control valve in bracket.
C32