940 L4-2.3L SOHC VIN 88 B230F (1992)
With protection between tool and glass, insert tool under moulding and pry loose clip as illustrated, taking care to avoid damage to moulding.
Ensure that all remains of PUR adhesive are removed at clip positions.
Install new, black clips (pin 1342004-7).
First install clips loosely (i.e., do not tighten against body flange).
Reinstall molding if undamaged.
Otherwise, replace moulding.
Press clips home.
Place protection between tool and glass. Insert tool under moulding and press clips "counterclockwise" until they are firmly seated against body.
740/940
Since these models are not equipped with PUR-bonded windshields, it is normally sufficient to tighten the clips by pressing "counterclockwise" against
body flange.
WARRANTY INFORMATION: Claims must be submitted during the New Car Warranty under:
