S80 L6-3.2L VIN 98 B6324S (2007)
Allow the excess fluid to run out.
When the fluid is between 50 °C and 60 °C, check that the transmission fluid has stopped running out and is only dropping from the level plug hole.
Caution! It is essential the temperature not exceed 60 °C, as this can result in the transmission fluid level being too low.
Install the integrated level plug (Torx 40). Use a new O-ring. Moisten the new O-ring using transmission fluid and tighten.
Note! Wipe away any transmission fluid spill.
Installing the lower engine cover
Fit the lower engine cover with bolts, 6 x M8. Tighten.
Switch off the engine.