Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


S80 FWD L6-3.2L VIN 98 B6324S (2010)

Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Body Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Body Control Module: > TJ22231 > Sep > 10 > Wipers - Wiper Motor Intermittently Inop./DTC CEM B11387 > Page 2321

Page 2
background image

disturbed and DTC CEM B113187 is set.

The fault will not occur once the wiper has been activated during present driving cycle.

PRODUCT MODIFICATION:
The CEM software has been optimized.

*SERVICE:
If the symptom has been identified:

Reset the Wiper Motor Module by removing the fuse F9 - 11B9 for 10 seconds.
install the fuse.

Then perform a CEM upgrade.
SW P/N for 124135 and 136: 30786042.
SW P/N for 156: 31270560.

Test the wiper function with wiper stalk activated before starting the car.

*Service info has been updated.

VOLVO STANDARD TIMES GUIDE (VSTG) INFO:

OPERATION NUMBER: 36004-2 Software Download.
"See VSTG for time"

-

Claims may be submitted under the new car warranty when there is a documented customer complaint using claim type: 01

-

Labor times are valid at the time of release and are subject to change.

Powertrain Management > Relays and Modules - Powertrain Management > Relays and Modules - Computers and Control Systems > Body Control Module > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Body Control Module: > TJ22231 > Sep > 10 > Wipers - Wiper Motor Intermittently Inop./DTC CEM B11387 > Page 2321

[PREV PAGE] [NEXT PAGE]