V70 XC AWD L5-2.4L Turbo VIN 56 B5254T (1998)
Master cylinder and EBD pressure sensor. Use new nuts. Tighten to 25 Nm (18.4 ft. lbs.).
Plugs from brake pipe and connect brake pipe.
Tighten to 14 Nm (10.3 ft. lbs.).
Connector to EBD sensor.
Brake fluid reservoir, as per (Not for VADIS use) Brake fluid reservoir, replacement and cleaning Brake fluid reservoir, replacement and cleaning.
Bleed braking system as per (Not for VADIS use) Bleeding brakes with bleeding unit. Bleeding brakes.Then continue as per instructions below.
Bleed clutch on cars with manual transmission.
Clean off any brake fluid spillages with lukewarm water and car-wash shampoo.
Pressure-testing the braking system
Once the system has been bled, it must be pressure-tested.
Depress the brake pedal as if braking sharply, nearly enough to lock the wheels, for 30 seconds. Check if there is any brake fluid leaking from the