Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V90 L6-2.9L VIN 96 B6304S (1998)

Powertrain Management > Transmission Control Systems > Relays and Modules - Transmission and Drivetrain > Relays and Modules - A/T > Control Module, A/T > Component Information > Locations > Page 2173

Page 1
background image

Control Module: Service Precautions

CONNECTING AND DISCONNECTING CONTROL MODULES

Always switch off the ignition before connecting or disconnecting a connector or the test box to a control module.

TEMPERATURE

The control module must not be heated to above 80— C. Remove control module when staving for example.

ARC WELDING

Disconnect connector from control modules when arc welding.
Remove control module before carrying out any arc welding work close to it.

REPLACING

Do not replace a control module without checking its wiring and components. The new component may be damaged in the same way as the old one.

Powertrain Management > Transmission Control Systems > Relays and Modules - Transmission and Drivetrain > Relays and Modules - A/T > Control Module, A/T > Component Information > Locations > Page 2173

[PREV PAGE] [NEXT PAGE]