XC90 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Drive Belt: Service and Repair
Auxiliaries belt / belt tensioner, replacing
Special tools:
999 5722 Wrench See: Tools and Equipment/999 5722 Wrench
999 7109 Wrench See: Tools and Equipment/999 7109 Wrench
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Removal
Removing the engine control module (ECM)
Ignition off. Wait 2 minutes.
Caution! Do not touch the terminal pins on the engine control module (ECM) with your fingers. Static electricity may damage components in
the control module.
Remove the cover over the control module box. Put the cover to one side.
Insert tool: 999 5722 Wrench See: Tools and Equipment/999 5722 Wrench around the control module. Move the upper section of the tool backwards as
far as it will go. Pull up the tool. Carefully pull up the control module.
For vehicles with automatic transmissions repeat the above work.
Remove the surround from around the control module box.
Removing the auxiliaries belt
