volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 20158 > < Location of Components|Page 20155
Page 1
background image

Seat Occupant Sensor: Procedures

Occupant weight sensor (OWS), cleaning

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.

Cleaning/Decontamination

Cleaning after leakage

Use Volvo's cleaning agent "Cleaner H", P/N 1161 436-9 (see the Volvo chemicals catalog), and a clean lint-free cloth or similar to clean the vehicle and
the seat.

Warning! Follow the instructions on the safety sheet when using "Cleaner H". Use suitable gloves and protective goggles. Wash your hands
after using "Cleaner H".

Use sawdust to absorb and remove any silicon dropped on the workshop floor or other surfaces. Sweep up the sawdust with the silicon into a plastic bag.

Caution! The plastic bag must be disposed of according to the workshop procedure for flammable waste.

Clean the equipment and surfaces using cleaner H and paper wipes.

Cleaning components

The following components must always be inspected after contamination by silicon and cleaned if contaminated:

-

the seat cushion upholstery

-

the backrest cushion upholstery

-

the metal structure of the base

-

the cable harness and connectors under the passenger seat

-

the electrical components under the passenger seat

-

the floor carpet on the passenger side

-

the floor carpet behind the passenger seat.

Replacing components

The following components must always be replaced if silicon leakage is confirmed:

-

pressure sensor/silicon cushion, the foam rubber (seat cushion) and the occupant weight sensor (OWS). Occupant weight sensor (OWS), replacing 
See: Removal and Replacement.

Finishing

Handling the waste

All materials used for cleaning and decontamination must be disposed of according to the workshop procedure for flammable waste.

Storing the ID number for the occupant weight sensor (OWS)

Caution! Store the ID number for the occupant weight sensor (OWS). See VIDA vehicle communication.

Calibrating the Occupant weight sensor (OWS)

Warning! Calibrate the Occupant weight sensor (OWS). See VIDA vehicle communication.

Procedures|Page 20158 > < Location of Components|Page 20155