Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC90 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)

Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Transmission Position Switch/Sensor, A/T > Component Information > Locations > Page 3840

Page 3
background image

Install:

-

the lever for the gear shift linkage rod. Tighten the nut. See 

-

the gear selector cable to the transmission. Use 2 M8 screws. Tighten. Press the ball joint for the cable into place on the lever

-

the connector for the gear-shift position sensor on the mounting. Connect the connector.

Assemble the cable harness with tie straps.
Press the mounting for the cable harness into place in the cover for the control system. Install the mounting for the connectors on the bracket.

Installing the air cleaner (ACL) housing

Install the air cleaner (ACL) housing with connections.

Checking diagnostic trouble codes (DTCs)

Check and erase any diagnostic trouble codes (DTCs).
Check the gear-shift position sensor positions: Use the on-board diagnostic (OBD) system.

Sensors and Switches > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Transmission Position Switch/Sensor, A/T > Component Information > Locations > Page 3840

[PREV PAGE] [NEXT PAGE]