Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC90 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)

Sensors and Switches > Sensors and Switches - Transmission and Drivetrain > Sensors and Switches - A/T > Transmission Speed Sensor, A/T > Component Information > Locations > Page 3995

Page 1
background image

Transmission Speed Sensor: Service and Repair

Input speed sensor/output speed sensor, replacing

Note! As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
essential information is always correct.

Removal

Preparations

Switch off the ignition.

Removing the air cleaner (ACL) housing

Ignition off.
Remove the air cleaner housing ACL assembly with the intake pipe.

1. The intake manifold
2. The hose from the mass air flow (MAF) sensor
3. Connector.

Pull the air cleaner (ACL) housing out of its mountings.

Removing the cable harness

Remove the mounting for the cable harness from the cover for the control system.
Unhook the mounting with the connectors for the cable harness from the bracket for the air cleaner (ACL) housing.
Remove the tie straps from the cable harness.
Separate the connectors for the transmission output speed sensor and the transmission input speed sensor.
Unhook the connectors from the mounting.
Clean thoroughly around the sensors.
Remove the sensors and the cable harness.

Installation

Note! For tightening torques, see See: Specifications/Mechanical Specifications/Automatic Transmission/Transaxle/System Specifications/Tightening

Sensors and Switches > Sensors and Switches - Transmission and Drivetrain > Sensors and Switches - A/T > Transmission Speed Sensor, A/T > Component Information > Locations > Page 3995

[PREV PAGE] [NEXT PAGE]