CL L4-2254cc 2.3L SOHC (VTEC) MFI (1998)
9. Remove the cable guide and grommet,
10. Remove the shift cable, then replace it.
11. Install the shift cable in the reverse order of removal.
NOTE:
-
Make sure the lock pin is seated securely in the adjuster, when installing the lock pin.
-
Replace the lock pin, if it does not snap over the adjuster securely.
-
To prevent damage to the control lever joint, be sure to install the shift cable holder after installing the shift cable cover to the torque converter
housing.
12. Check the cable adjustment after installing the shift cable.