Integra LS Coupe L4-1834cc 1.8L DOHC MFI (1997)
Case: Service and Repair
Sub-Shaft
TOOLS REQUIRED
-
07749-0010000 driver
-
07746-0010500 Attachment, 62 x 68 mm
-
Or Equivalent
1. To remove the sub-shaft bearing from the transmission housing, expand the snap ring with snap ring pliers, then push the bearing out using the
special tools and a press as shown.
NOTE: Do not remove the snap ring unless it's necessary to clean the groove in the housing.
2. Expand the snap ring with snap ring pliers, insert the new bearing part-way into the housing using the special tools and a press as shown. Install the
bearing with the groove facing outside the housing.
NOTE: Coat all parts with ATF.