MDX V6-3471cc 3.5L (2002)
YES - Go to step 6.
NO - Go to step 15.
6. Disconnect the jumper wire.
7. Turn the ignition switch ON (II).
8. Measure the voltage between the No.4 terminal of the compressor clutch relay 4P socket and body ground.
Is there battery voltage?
YES - Go to step 9.
NO - Repair open in the wire between the No.3 fuse in the driver's under-dash fuse/relay box and the compressor clutch relay.
9. Turn the ignition switch OFF.
10. Reinstall the compressor clutch relay.
11. Make sure the A/C switch is OFF.
12. Turn the ignition switch ON (II).
13. Using the Backprobe Set, measure the voltage between the No.17 terminal of PCM connector A (32P) and body ground with the PCM connectors
connected.
Is there battery voltage?
YES - Go to step 14.
NO - Repair open in the wire between the compressor clutch relay and the PCM.