RDX L4-2.3L Turbo (2008)
Trunk / Liftgate Latch: Service and Repair
Tailgate Latch Replacement
NOTE:
-
Put on gloves to protect your hands.
-
If the tailgate latch doesn't open by pulling the tailgate handle or using the keyless entry transmitter, remove the maintenance lid (A) from the
tailgate lower trim panel, then turn the emergency lever (B) clockwise as shown.
1. Remove the tailgate lower trim panel.
2. Disconnect the actuator connector (A) and latch switch connector (B), then remove the bolts.
3. Pull the tailgate latch (C) out, then remove the latch.
4. Install the latch in the reverse order of removal, and note these items:
-
Make sure the connectors are plugged in properly.
-
Make sure the tailgate opens properly and locks securely.
